Hello everyone,
I am using DragonBoard 410c, and I am trying to use the little kernel for Ubuntu. I followed this manual (little kernel for Android), and tried to burn a Linux kernel image (mkbootimg --kernel arch/arm64/boot/Image --ramdisk initrd.img-4.2.0-linaro-lt-qcom --output boot-db410c.img --dt dt.img …)
I downloaded the little kernel source code, (for aboot) from git (git://codeaurora.org/kernel/lk.git) as the manual says
I then compiled and created a Linux kernel image and device tree. I used a ramfs from the release notes http://builds.96boards.org/releases/dragonboard410c/linaro/ubuntu/latest
kernel using aboot.
The aboot loads the boot but fails, and the Linux does not load properly. The output below…
I bet it has to do something with the little kernel version, which makes it work for Android only. It fails recognizing some of the partitions. How do I get an aboot for Linux instead of Android ?
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
S - IMAGE_VARIANT_STRING=HAAAANAAA
S - OEM_IMAGE_VERSION_STRING=C-BPATTH
S - Boot Config, 0x000002e1
S - Core 0 Frequency, 0 MHz
B - 1545 - PBL, Start
B - 3490 - bootable_media_detect_entry, Start
B - 101049 - bootable_media_detect_success, Start
B - 101054 - elf_loader_entry, Start
B - 102728 - auth_hash_seg_entry, Start
B - 102937 - auth_hash_seg_exit, Start
B - 118065 - elf_segs_hash_verify_entry, Start
B - 177297 - PBL, End
B - 183183 - SBL1, Start
B - 245891 - pm_device_init, Start
D - 14762 - pm_device_init, Delta
B - 261263 - boot_flash_init, Start
D - 0 - boot_flash_init, Delta
B - 265289 - boot_config_data_table_init, Start
D - 273798 - boot_config_data_table_init, Delta - (0 Bytes)
B - 543632 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B - 549854 - sbl1_ddr_set_params, Start
B - 553544 - cpr_init, Start
D - 0 - cpr_init, Delta
B - 559156 - Pre_DDR_clock_init, Start
D - 183 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 571661 - pm_driver_init, Start
D - 6832 - pm_driver_init, Delta
B - 587155 - clock_init, Start
D - 61 - clock_init, Delta
B - 597281 - Image Load, Start
D - 24644 - QSEE Image Loaded, Delta - (460664 Bytes)
B - 621956 - Image Load, Start
D - 396 - SEC Image Loaded, Delta - (2048 Bytes)
B - 629184 - sbl1_efs_handle_cookies, Start
D - 61 - sbl1_efs_handle_cookies, Delta
B - 636962 - Image Load, Start
D - 13450 - QHEE Image Loaded, Delta - (51952 Bytes)
B - 650443 - Image Load, Start
D - 12993 - RPM Image Loaded, Delta - (149492 Bytes)
B - 663466 - Image Load, Start
D - 13115 - APPSBL Image Loaded, Delta - (530344 Bytes)
B - 676612 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 682285 - SBL1, End
D - 501481 - SBL1, Delta
S - Flash Throughput, 108000 KB/s (1194500 Bytes, 10980 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[40] SDHC Running in HS200 mode
[50] Done initialization of the card
[50] pm8x41_get_is_cold_boot: cold boot
[50] Neither 'config' nor 'frp' partition found
[60] Not able to search the panel:
[60] ADV7533 Rev ID: 0x14
[70] ERROR: splash Partition invalid
[170] Config MIPI_VIDEO_PANEL.
[170] Turn on MIPI_VIDEO_PANEL.
[190] Video lane tested successfully
[190] pm8x41_get_is_cold_boot: cold boot
[200] misc: Partition not found
[200] error in emmc_recovery_init
[200] Unable to locate /bootselect partition
[210] No 'misc' partition found
[210] Error reading MISC partition
[210] failed to get ffbm cookie[220] Loading (boot) image (11970560): start
[290] Loading (boot) image (11970560): done
[300] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[310] DTB Total entry: 15, DTB version: 2
[320] Using DTB entry 0x000000f7/00000000/0x00010018/0 for device 0x000000f7/00010000/0x00010018/0
[320] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
[330] cmdline: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=b8622290 androidbooi
[350] Updating device tree: start
[410] Updating device tree: done
[410] Turn off MIPI_VIDEO_PANEL.
[480] booting linux @ 0x80080000, ramdisk @ 0x82000000 (20), tags/device tree @ 0x81e00000
[480] Jumping to kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-linaro-lt-qcom (alon@alon-Latitude-E6430) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #4 SMP P6
[ 0.000000] CPU: AArch64 Processor [410fd030] revision 0
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: enabling workaround for ARM errata 826319, 827319, 824069
[ 0.000000] alternatives: enabling workaround for ARM erratum 845719
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
[ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03bf61000 s26880 r8192 d30464 u65536
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 234864
[ 0.000000] kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialni
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 14668(89%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0xb6c00000-0xbac00000] (64MB) mapped at [ffffffc036c00000-ffffffc03abfffff]
[ 0.000000] Memory: 779324K/954368K available (7419K kernel code, 645K rwdata, 3036K rodata, 472K init, 13252K bss, 109508K reserved, 65536K cma-r)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc2000000 - 0xffffffbdc3000000 ( 16 MB actual)
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] .init : 0xffffffc000ab8000 - 0xffffffc000b2e000 ( 472 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000ab7cd4 ( 10464 KB)
[ 0.000000] .data : 0xffffffc000b35000 - 0xffffffc000bd6400 ( 645 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000339] Console: colour dummy device 80x25
[ 0.000363] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000371] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000378] ... MAX_LOCK_DEPTH: 48
[ 0.000385] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000392] ... CLASSHASH_SIZE: 4096
[ 0.000400] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000407] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000415] ... CHAINHASH_SIZE: 32768
[ 0.000422] memory used by lock dependency info: 8159 kB
[ 0.000430] per task-struct memory footprint: 1920 bytes
[ 0.000452] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000466] pid_max: default: 32768 minimum: 301
[ 0.000712] Security Framework initialized
[ 0.000813] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000825] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002350] Initializing cgroup subsys blkio
[ 0.002393] Initializing cgroup subsys memory
[ 0.002462] Initializing cgroup subsys devices
[ 0.002504] Initializing cgroup subsys hugetlb
[ 0.003286] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.003341] EFI services will not be available.
[ 0.040861] CPU1: Booted secondary processor
[ 0.040884] Detected VIPT I-cache on CPU1
[ 0.050657] CPU2: Booted secondary processor
[ 0.050670] Detected VIPT I-cache on CPU2
[ 0.060713] CPU3: Booted secondary processor
[ 0.060727] Detected VIPT I-cache on CPU3
[ 0.060958] Brought up 4 CPUs
[ 0.060988] SMP: Total of 4 processors activated.
[ 0.060995] CPU: All CPU(s) started at EL1
[ 0.061164] alternatives: patching kernel code
[ 0.063142] devtmpfs: initialized
[ 0.099257] DMI not present or invalid.
[ 0.100470] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.103112] pinctrl core: initialized pinctrl subsystem
[ 0.107056] NET: Registered protocol family 16
[ 0.140115] cpuidle: using governor ladder
[ 0.180132] cpuidle: using governor menu
[ 0.180426] vdso: 2 pages (1 code @ ffffffc000b3d000, 1 data @ ffffffc000b3c000)
[ 0.180525] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.183349] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.183902] Serial: AMBA PL011 UART driver
[ 0.195004] qcom-smd soc:smd: new channel 'rpm_requests' info-size: 88 fifo-size: 1024
[ 0.223375] irq: no irq domain found for /soc/wcnss-smp2p/slave-kernel !
[ 0.226020] irq: no irq domain found for /soc/qcom,mdss_mdp@1a00000 !
[ 0.285454] msm_iommu 1f00000.qcom,iommu: invalid resource
[ 0.285625] msm_iommu 1f00000.qcom,iommu: iface: 0, core: 0
[ 0.285701] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff80003a0000, with 2 ctx banks
[ 0.285963] genirq: Setting trigger mode 1 for irq 149 failed (gic_set_type+0x0/0x5c)
[ 0.286250] msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 149 failed with ret=-22
[ 0.287822] msm_iommu 1e00000.qcom,iommu: iface: 0, core: 0
[ 0.287894] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8000680000, with 20 ctx banks
[ 0.288154] genirq: Setting trigger mode 1 for irq 149 failed (gic_set_type+0x0/0x5c)
[ 0.288268] msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 149 failed with ret=-22
[ 0.300596] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[ 0.301089] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[ 0.301533] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[ 0.301928] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[ 0.302304] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[ 0.302676] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
[ 0.303040] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[ 0.303407] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[ 0.303772] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[ 0.304151] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[ 0.304537] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[ 0.304903] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
[ 0.305273] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
[ 0.305639] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
[ 0.306001] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[ 0.306379] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[ 0.306752] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[ 0.307113] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[ 0.307474] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[ 0.307837] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[ 0.308197] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[ 0.308570] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[ 0.309179] qcom_iommu: iommu sec: psize[0]: 94208, psize[1]: 0
[ 0.310566] vgaarb: loaded
[ 0.311158] SCSI subsystem initialized
[ 0.312374] usbcore: registered new interface driver usbfs
[ 0.312521] usbcore: registered new interface driver hub
[ 0.312690] usbcore: registered new device driver usb
[ 0.313012] Linux video capture interface: v2.00
[ 0.313468] dmi: Firmware registration failed.
[ 0.314272] Advanced Linux Sound Architecture Driver Initialized.
[ 0.317007] clocksource: Switched to clocksource arch_sys_counter
[ 0.342826] NET: Registered protocol family 2
[ 0.344507] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.344625] TCP bind hash table entries: 8192 (order: 7, 524288 bytes)
[ 0.347366] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.347554] UDP hash table entries: 512 (order: 4, 81920 bytes)
[ 0.347919] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes)
[ 0.348987] NET: Registered protocol family 1
[ 0.349873] RPC: Registered named UNIX socket transport module.
[ 0.349885] RPC: Registered udp transport module.
[ 0.349894] RPC: Registered tcp transport module.
[ 0.349903] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.350563] Unpacking initramfs...
[ 0.350595] Initramfs unpacking failed: junk in compressed archive
[ 0.351400] kvm [1]: HYP mode not available
[ 0.355910] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.356377] audit: initializing netlink subsys (disabled)
[ 0.356575] audit: type=2000 audit(0.339:1): initialized
[ 0.358418] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.393763] VFS: Disk quotas dquot_6.6.0
[ 0.394384] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.407103] NFS: Registering the id_resolver key type
[ 0.407349] Key type id_resolver registered
[ 0.407361] Key type id_legacy registered
[ 0.408061] fuse init (API version 7.23)
[ 0.409398] 9p: Installing v9fs 9p2000 file system support
[ 0.411617] io scheduler noop registered
[ 0.412725] io scheduler cfq registered (default)
[ 0.429436] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.434535] msm_serial 78b0000.serial: msm_serial: detected port #0
[ 0.434716] msm_serial 78b0000.serial: uartclk = 3686400
[ 0.434839] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 132, base_baud = 230400) is a MSM
[ 0.435005] msm_serial: console setup on port #0
[ 1.443658] console [ttyMSM0] enabled
[ 1.449819] msm_serial: driver initialized
[ 1.453034] [drm] Initialized drm 1.1.0 20060810
[ 1.456657] msm_dsi_phy 1a98300.qcom,mdss_dsi_phy: Failed to get supply 'vddio': -517
[ 1.460473] msm_dsi_phy 1a98300.qcom,mdss_dsi_phy: dsi_phy_regulator_init: failed to init regulator, ret=-517
[ 1.468196] msm_dsi_phy 1a98300.qcom,mdss_dsi_phy: dsi_phy_driver_probe: failed to init regulator
[ 1.486359] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 1.487723] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 1.494264] msm_dsi 1a98000.qcom,mdss_dsi: Failed to get supply 'vdd': -517
[ 1.501432] dsi_regulator_init: failed to init regulator, ret=-517
[ 1.508115] msm_dsi_host_init: regulator init failed
[ 1.514419] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 1.523495] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[ 1.548497] loop: module loaded
[ 1.566459] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[ 1.590471] tun: Universal TUN/TAP device driver, 1.6
[ 1.590497] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.595575] sky2: driver version 1.30
[ 1.601976] usbcore: registered new interface driver asix
[ 1.604427] usbcore: registered new interface driver ax88179_178a
[ 1.609819] usbcore: registered new interface driver cdc_ether
[ 1.615869] usbcore: registered new interface driver dm9601
[ 1.621618] usbcore: registered new interface driver net1080
[ 1.627090] usbcore: registered new interface driver plusb
[ 1.632972] usbcore: registered new interface driver cdc_subset
[ 1.638305] usbcore: registered new interface driver zaurus
[ 1.644142] usbcore: registered new interface driver cdc_ncm
[ 1.653269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.655439] ehci-pci: EHCI PCI platform driver
[ 1.661932] ehci-platform: EHCI generic platform driver
[ 1.666646] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 1.671788] msm_hsusb_host 78d9000.ehci: unable to find transceiver
[ 1.677292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.683162] ohci-pci: OHCI PCI platform driver
[ 1.689517] ohci-platform: OHCI generic platform driver
[ 1.694326] usbcore: registered new interface driver cdc_acm
[ 1.698943] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.704985] usbcore: registered new interface driver usblp
[ 1.712683] usbcore: registered new interface driver cdc_wdm
[ 1.718237] usbcore: registered new interface driver uas
[ 1.724073] usbcore: registered new interface driver usb-storage
[ 1.729488] usbcore: registered new interface driver usbserial
[ 1.735293] usbcore: registered new interface driver usbserial_generic
[ 1.741341] usbserial: USB Serial support registered for generic
[ 1.758157] usb3503 usb2513: switched to HUB mode
[ 1.758183] usb3503 usb2513: usb3503_probe: probed in hub mode
[ 1.764400] usbip_core: USB/IP Core v1.0.0
[ 1.767713] usbcore: registered new device driver usbip-host
[ 1.771663] usbip_host: USB/IP Host Driver v1.0.0
[ 1.778728] mousedev: PS/2 mouse device common for all mice
[ 1.784886] i2c_qup 78b8000.i2c:
[ 1.784886] tx channel not available
[ 1.789258] l3: supplied by s3
[ 1.798406] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[ 1.799613] sdhci: Secure Digital Host Controller Interface driver
[ 1.804018] sdhci: Copyright(c) Pierre Ossman
[ 1.810396] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.822721] l5: supplied by s4
[ 1.823046] sdhci_msm 7824900.sdhci: Failed getting OCR mask: 0
[ 1.867092] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 1.872965] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.883508] sdhci_msm 7864900.sdhci: Failed getting OCR mask: 0
[ 1.935085] mmc0: MAN_BKOPS_EN bit is not set
[ 1.937364] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[ 1.940316] mmc0: new high speed MMC card at address 0001
[ 1.943348] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.944763] usbcore: registered new interface driver usbhid
[ 1.944766] usbhid: USB HID core driver
[ 1.965205] mmcblk0: mmc0:0001 DS2008 7.28 GiB
[ 1.966074] l7: supplied by s4
[ 1.966845] l7: operation not allowed
[ 1.974801] mmcblk0boot0: mmc0:0001 DS2008 partition 1 4.00 MiB
[ 1.975499] qcom-tz-pil soc:pronto_rproc: Found relocation area 6291456@0x000000008b600000
[ 1.975698] remoteproc0: soc:pronto_rproc is available
[ 1.975702] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 1.975707] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 1.978846] remoteproc0: Direct firmware load for wcnss.mdt failed with error -2
[ 1.978857] remoteproc0: failed to load soc:pronto_rproc
[ 1.982364] usbcore: registered new interface driver snd-usb-audio
[ 1.984574] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 1.984658] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 1.984751] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 1.984855] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 1.987852] qcom-apq8016-sbc 7702000.sound: error getting codec dai name
[ 1.987859] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 1.991782] NET: Registered protocol family 10
[ 1.994920] sit: IPv6 over IPv4 tunneling driver
[ 1.996488] NET: Registered protocol family 17
[ 1.996759] 9pnet: Installing 9P2000 support
[ 1.997033] Key type dns_resolver registered
[ 1.999131] registered taskstats version 1
[ 2.001121] l6: supplied by s4
[ 2.013367] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 2.014275] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 2.014686] l2: supplied by s3
[ 2.135631] mmcblk0boot1: mmc0:0001 DS2008 partition 2 4.00 MiB
[ 2.138190] mmcblk0rpmb: mmc0:0001 DS2008 partition 3 4.00 MiB
[ 2.140307] msm 1a00000.qcom,mdss_mdp: bound 1a98000.qcom,mdss_dsi (ops dsi_ops)
[ 2.140353] msm 1a00000.qcom,mdss_mdp: bound 1c00000.qcom,adreno-3xx (ops a3xx_ops)
[ 2.140444] 1a00000.qcom,mdss_mdp supply vdd not found, using dummy regulator
[ 2.159431] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.159435] [drm] No driver support for vblank timestamp query.
[ 2.185320] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 2.248477] mmc1: new high speed SDHC card at address aaaa
[ 2.249388] mmcblk1: mmc1:aaaa SE16G 14.8 GiB
[ 2.263128] mmcblk1: p1
[ 2.323362] l17: operation not allowed
[ 2.323374] l2: operation not allowed
[ 2.323384] l6: operation not allowed
[ 2.326549] l6: operation not allowed
[ 2.382547] Console: switching to colour frame buffer device 240x67
[ 2.445937] msm 1a00000.qcom,mdss_mdp: fb0: msm frame buffer device
[ 2.452007] msm 1a00000.qcom,mdss_mdp: registered panic notifier
[ 2.487146] [drm] Initialized msm 1.0.0 20130625 on minor 0
[ 2.488493] msm_otg 78d9000.phy: OTG regs = ffffff8000512000
[ 2.492036] msm_otg 78d9000.phy: no vddcx
[ 2.498429] l7: operation not allowed
[ 2.501321] l13: operation not allowed
[ 2.618782] cpu cpu0: _opp_add_dynamic: duplicate OPPs detected. Existing: freq: 200000000, volt: 1050000, enabled: 1. New: freq: 200000000, volt:1
[ 2.618834] cpu cpu0: _opp_add_dynamic: duplicate OPPs detected. Existing: freq: 400000000, volt: 1050000, enabled: 1. New: freq: 400000000, volt:1
[ 2.632575] cpu cpu0: _opp_add_dynamic: duplicate OPPs detected. Existing: freq: 533330000, volt: 1112500, enabled: 1. New: freq: 533330000, volt:1
[ 2.647418] cpu cpu0: _opp_add_dynamic: duplicate OPPs detected. Existing: freq: 800000000, volt: 1112500, enabled: 1. New: freq: 800000000, volt:1
[ 2.662255] cpu cpu0: _opp_add_dynamic: duplicate OPPs detected. Existing: freq: 998400000, volt: 1250000, enabled: 1. New: freq: 998400000, volt:1
[ 2.677103] cpu cpu0: _opp_add_dynamic: duplicate OPPs detected. Existing: freq: 1094400000, volt: 1250000, enabled: 1. New: freq: 1094400000, vol1
[ 2.691942] cpu cpu0: _opp_add_dynamic: duplicate OPPs detected. Existing: freq: 1152000000, volt: 1250000, enabled: 1. New: freq: 1152000000, vol1
[ 2.707272] cpu cpu0: _opp_add_dynamic: duplicate OPPs detected. Existing: freq: 1209600000, volt: 1250000, enabled: 1. New: freq: 1209600000, vol1
[ 2.722534] CPR closed loop is enabled
[ 2.738227] CPR is enabled!
[ 2.745634] Set corner to 6
[ 2.752647] qcom-apq8016-sbc 7702000.sound: adv7511 <-> Quatenary MI2S mapping ok
[ 2.757340] hctosys: unable to open rtc device (rtc0)
[ 2.784689] ALSA device list:
[ 2.784710] #�[ 2.789470] Waiting for root device /dev/disk/by-partlabel/rootfs...
[ 2.897988] Set corner to 3
[ 3.047558] Set corner to 3
[ 4.801031] msm_hsusb_host 78d9000.ehci: EHCI Host Controller
[ 4.810244] msm_hsusb_host 78d9000.ehci: new USB bus registered, assigned bus number 1
[ 4.812750] msm_hsusb_host 78d9000.ehci: irq 141, io mem 0x078d9000
[ 4.837281] msm_hsusb_host 78d9000.ehci: USB 2.0 started, EHCI 1.00
[ 4.842091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.842396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.847314] Set corner to 3
[ 4.856433] usb usb1: Product: EHCI Host Controller
[ 4.859154] usb usb1: Manufacturer: Linux 4.2.0-linaro-lt-qcom ehci_hcd
[ 4.863989] usb usb1: SerialNumber: 78d9000.ehci
[ 4.878236] hub 1-0:1.0: USB hub found
[ 4.878900] hub 1-0:1.0: 1 port detected
[ 5.197115] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
[ 5.257588] Set corner to 3
[ 5.348869] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
[ 5.348944] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.367165] hub 1-1:1.0: USB hub found
[ 5.367751] hub 1-1:1.0: 3 ports detected
[ 5.477357] Set corner to 3
[ 5.647558] Set corner to 3
[ 5.657225] usb 1-1.1: new low-speed USB device number 3 using msm_hsusb_host
[ 5.774467] usb 1-1.1: New USB device found, idVendor=045e, idProduct=07b9
[ 5.774543] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.780336] usb 1-1.1: Product: USB Keyboard
[ 5.787532] usb 1-1.1: Manufacturer: LITEON Technology
[ 5.819950] input: LITEON Technology USB Keyboard as /devices/platform/soc/78d9000.ehci/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:07B9.0001/input/input0
[ 5.847435] Set corner to 3
[ 5.883759] hid-generic 0003:045E:07B9.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-78d9000.ehci-1.1/input0
[ 5.958298] msm_hsusb_host 78d9000.ehci: remove, state 1
[ 5.958963] usb 1-1: USB disconnect, device number 2
[ 5.959118] usb usb1: USB disconnect, device number 1
[ 5.977103] usb 1-1.2: new low-speed USB device number 4 using msm_hsusb_host
[ 5.978239] usb 1-1.1: USB disconnect, device number 3
[ 6.191005] msm_hsusb_host 78d9000.ehci: USB bus 1 deregistered
[ 6.527583] Set corner to 3
[ 117.735575] random: nonblocking pool is initialized
