Dear 96boards,
Here I am come back again for solve my issue that cannot recognize cameras on Rock960C board.
My condition:
- Rock960C (4GB memory + sdcard, eMMC not used for now)
- AISTARVISION MIPI adapter v2.1
- ov5645 x 2
- Rock960 uboot + kernel + rootfs for aarch64 (arm64) build
Adapter config:
Dip switch followed to Setting up CSI camera with Rock960 Model A&B board - 96Boards
dmesg failure:
linaro@linaro-alip:~$ dmesg | grep ov5645
[ 1.562072] ov5645 2-003c: GPIO lookup for consumer reset
[ 1.562080] ov5645 2-003c: using device tree for GPIO lookup
[ 1.562134] ov5645 2-003c: GPIO lookup for consumer pwdn
[ 1.562140] ov5645 2-003c: using device tree for GPIO lookup
[ 1.562187] ov5645 2-003c: Looking up avdd-supply from device tree
[ 1.562196] ov5645 2-003c: Looking up avdd-supply property in node /i2c@ff120000/camera-module@3C failed
[ 1.563364] ov5645 2-003c: Looking up dovdd-supply from device tree
[ 1.563372] ov5645 2-003c: Looking up dovdd-supply property in node /i2c@ff120000/camera-module@3C failed
[ 1.564488] ov5645 2-003c: Looking up dvdd-supply from device tree
[ 1.564496] ov5645 2-003c: Looking up dvdd-supply property in node /i2c@ff120000/camera-module@3C failed
[ 1.565656] ov5645 2-003c: could not get sleep pinstate
[ 1.604835] ov5645 2-003c: Detected OV005645 sensor, REVISION 0x5645
[ 1.611273] ov5645 6-003c: GPIO lookup for consumer reset
[ 1.611284] ov5645 6-003c: using device tree for GPIO lookup
[ 1.611373] ov5645 6-003c: GPIO lookup for consumer pwdn
[ 1.611383] ov5645 6-003c: using device tree for GPIO lookup
[ 1.611451] ov5645 6-003c: Looking up avdd-supply from device tree
[ 1.611464] ov5645 6-003c: Looking up avdd-supply property in node /i2c@ff150000/camera-module@3C failed
[ 1.612673] ov5645 6-003c: Looking up dovdd-supply from device tree
[ 1.612685] ov5645 6-003c: Looking up dovdd-supply property in node /i2c@ff150000/camera-module@3C failed
[ 1.613856] ov5645 6-003c: Looking up dvdd-supply from device tree
[ 1.613868] ov5645 6-003c: Looking up dvdd-supply property in node /i2c@ff150000/camera-module@3C failed
[ 1.615135] ov5645 6-003c: could not get sleep pinstate
[ 1.621040] ov5645 6-003c: Error applying setting, reverse things back
[ 1.622249] ov5645 6-003c: could not set pins
[ 2.662566] ov5645 6-003c: Unexpected sensor id(000000), ret(-5)
[ 2.664216] ov5645: probe of 6-003c failed with error -5
What should I need to do ? Changes pin state for where ?
It occurs many failures, but I can’t sens what I need to do for now.
Any help may great for me.
Regards, Raph.