This is a cache of https://discuss.96boards.org/t/optee-android-8/3160. It is a snapshot of the page at 2024-10-31T08:07:34.570+0000.
OPTEE + <strong>android</strong> 8 - HiKey - 96Boards Forum

OPTEE + android 8

Products Support HiKey
#1

Hello ,
Is there working repo for OPTEE on android 8 ?
Please let me know

Also, if there is working android 8 (without OPTEE), pls give details of repo.
I see another thread with android-8 bugs (List of Bugs android Oreo on HiKey Board)
I wonder, if that repo is in workable condition !!!

Thanks
Deepak

#2

Is there working repo for OPTEE on android 8 ?

No

Also, if there is working android 8 (without OPTEE), pls give details of repo.

You should be able to use https://source.android.com/source/devices#620userspace, but just replace master branch manifest with one from android 8. E.g. repo init -u https://android.googlesource.com/platform/manifest -b android-8.0.0_r17. ‘Workable condition’ is relative as android 8 is relatively new so expect bugs as you’d seen in the other thread.

#3

Hey Victor,
Is there any plan to support android 8 + OPTEE on hikey ?

Also , FYI , I flashed latest Images (https://builds.96boards.org/snapshots/hikey/linaro/aosp-master/568/) , Hikey booted successfully and the version it is showing is android P
Is that really correct ?

Thanks

#4

Hi ,
I am getting strange errors like below :

[18:01:10]viswanath@[~/Downloads/aosp8]$ make -j8
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=8.0.0
TARGET_PRODUCT=hikey
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.13.0-101-generic-x86_64-with-Ubuntu-14.04-trusty
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=OPR5.170623.007
OUT_DIR=out
============================================
[38/38] bootstrap out/soong/.minibootstrap/build.ninja.in
[4/4] cp out/soong/.bootstrap/bin/bpglob
[621/622] glob vendor/*/*/android.bp
[40/40] out/soong/.bootstrap/bin/soong_build out/soong/build.ninja
out/build-hikey.ninja is missing, regenerating...
Checking build tools versions...
[354/973] including ./frameworks/av/media/libaaudio/android.mk ...
frameworks/av/media/libaaudio/examples/input_monitor/static/android.mk: warning: input_monitor: unusual tags examples
frameworks/av/media/libaaudio/examples/write_sine/static/android.mk: warning: write_sine: unusual tags examples
[388/973] including ./frameworks/base/android.mk ...
./frameworks/base/android.mk:865: warning: FindEmulator: find: `frameworks/opt/telephony/src/java/android/provider': No such file or directory
./frameworks/base/android.mk:874: warning: FindEmulator: find: `frameworks/opt/telephony/src/java/android/provider': No such file or directory
./frameworks/base/android.mk:879: warning: FindEmulator: find: `frameworks/opt/telephony/src/java/android/provider': No such file or directory
./frameworks/base/android.mk:884: warning: FindEmulator: find: `frameworks/opt/telephony/src/java/android/provider': No such file or directory
[410/973] including ./frameworks/native/cmds/surfacereplayer/replayer/android.mk ...
: No such file or directory
[716/973] including ./system/sepolicy/android.mk ...
./system/sepolicy/android.mk:107: warning: BOARD_SEPOLICY_VERS not specified, assuming current platform version
[721/973] including ./system/update_engine/android.mk ...
build/core/notice_files.mk:114: error: missing separator.
18:01:57 ckati failed with: exit status 1
make: *** [run_soong_ui] Error 1

#### make failed to build some targets (38 seconds) ####

Fixed many errors by running dos2unix on .SH and .BASH files but no idea about these. !!!

FYI … My code base in on linux machine, and compiling it via ssh from another machine

Thanks

#5

Is there any plan to support android 8 + OPTEE on hikey ?

Nothing firm atm.

I flashed latest Images (https://builds.96boards.org/snapshots/hikey/linaro/aosp-master/568/) , Hikey booted successfully and the version it is showing is android P
Is that really correct ?

Master branch is currently post-O and pre-P so you’re probably looking at a pre-release P tag. Just think of it as the current master branch.

Fixed many errors by running dos2unix on .SH and .BASH files but no idea about these. !!! FYI … My code base in on linux machine, and compiling it via ssh from another machine

Real or virtual linux on a Windows host? Sounds like Windows might have touched the files for some reason? Can you also check that repo sync completed without errors?

#6

Yes… the P-ness of the AOSP branch is a little confusing (it essentially contains post-O community contributions… but not the secret stuff Google is working on). See:
https://source.android.com/source/faqs#how-is-the-android-software-developed

#7

Hi,

Master branch is currently post-O and pre-P so you’re probably looking at a pre-release P tag. Just think of it as the current master branch.

Yep, got that

Real or virtual linux on a Windows host? Sounds like Windows might have touched the files for some reason? Can you also check that repo sync completed without errors?

I tried on Real Linux machine but same error came up.
Yes, repo sync is completed successfully, no errors seen there

On a fresh stack itself, I am getting this error :
> source ./build/envsetup.sh
> -bash: ./build/envsetup.sh: line 1: syntax error near unexpected token $'{\r'' > 'bash: ./build/envsetup.sh: line 1: function hmm() {

Then , I ran command on my old AOSP7+OPTEE stack, and it worked fine
I wonder what would be the problem :unamused:

Thanks

#8

There are still Windows EOL on your newly downloaded files.
Try vim build/envsetup.sh on both the new envsetup.sh and old (aosp7) envsetup.sh file and see if the EOL is different on both files? You should see lots of ^M on the new file, indicating Windows EOL. If so, you need to find out why your machine is doing that.

#9

Compilation successful
android Ver: 8.0.0
Security Patch Level : Oct 5, 2017

As I need to toggle between Win and Linux work env, I made git config settings as “autocrlf = true” which is causing trouble. Now , it seems everything is fine :slight_smile:

Thanks

#10

@deepakmnvl Great! And thanks for sharing the solution, which will be helpful to others!

1 Like
#11

Hi Victor,
How about the kernel src code ?
Can I follow the steps in “Building the kernel” section gievn here "https://source.android.com/source/devices#620userspace" ?

Thanks

#12

Can I follow the steps in “Building the kernel” section gievn here “https://source.android.com/source/devices#620userspace” ?

I’ve not tried but should be yes.

#13

ok, seems it is possible , as currently , am able to compile , and Image is created !!!.

My question is - is there any command like we used to compile for OPTEE+AOSP7 stack :
make -j8 TARGET_BUILD_UEFI=true TARGET_BUILD_KERNEL=true TARGET_BOOTIMAGE_USE_FAT=true

Am seeing some pointers at “https://source.android.com/source/building-kernels” but , I want to know if you guys have idea about this before I go digging

Thanks

EDIT:
I didnt understand this step :
Copy output to the hikey kernel directory (/kernel/hikey-linaro):

Copy hi6220-hikey.dtb (arch/arm64/boot/dts/hisilicon/hi6220-hikey.dtb) to the hikey-kernel directory as file hi6220-hikey.dtb-4.9.
**Copy the Image file (arch/arm64/boot/Image-dtb) to the hikey-kernel directory as file Image-dtb-4.9.**

What is " hikey-kernel directory" ?? :confused:

ANOTHER EDIT :
I think I got this, seems the dir is “device/linaro/hikey-kernel” , will try and let you know !!!

#14

is there any command like we used to compile for OPTEE+AOSP7 stack?

No, at least not yet, because you’re using a ‘pure’ Google stack, i.e. without Linaro patches to also build the kernel when you build aosp, so you have to build the kernel manually atm.

What is " hikey-kernel directory" ?

device/linaro/hikey-kernel

EDIT: Oh, ok, you found it.

#15

Hi ,
I am facing an error when trying to do insmod from “aosp8\device\linaro\hikey\init.common.rc” like below :
on post-fs
insmod /system/lib/myspidrv.ko
chmod 0666 /dev/myspi
chown system system /dev/myspi

Error am seeing on dmesg :
[ 7.866548] init: finit_module for “/system/lib/myspidrv.ko” failed: Operation not permitted

This approach worked in AOSP7
Now, if I run “insmod myspidrv.ko” from hikey shell, its successful !!!

Any help here is appreciated

Thanks

#16

am able to resolve the error !!!

thanks

#17

Would be nice if you can share the solution for the community as well. Thanks.

#18

Sure,
I made many changes , some of these must have affected the behavior

system/sepolicy/public/domain.te
+# neverallow * ~{ system_file vendor_file rootfs }:system module_load;

system/sepolicy/public/init.te
+allow init self:capability { sys_module };
+allow init system_file:system { module_load };

Thanks

#19

hi ,
I need to verify with “TREBLE” feature enabled on hikey.
So , as suggested in another thread, I did following changes
PRODUCT_FULL_TREBLE_OVERRIDE := true in device/linaro/hikey/hikey.mk

and am getting below errors

[  0% 16/2323] build out/target/product/hikey/obj/FAKE/selinux_policy_intermediates/plat_pub_policy.cil
out/host/linux-x86/bin/checkpolicy:  loading policy configuration from out/target/product/hikey/obj/FAKE/selinux_policy_intermediates/plat_pub_policy.conf
out/host/linux-x86/bin/checkpolicy:  policy configuration loaded
out/host/linux-x86/bin/checkpolicy:  writing CIL to out/target/product/hikey/obj/FAKE/selinux_policy_intermediates/plat_pub_policy.cil.tmp
[  0% 20/2323] Ensuring Jack server is installed and started
Jack server already installed in "/home/viswanath/.jack-server"
Server is already running
[  0% 21/2323] build out/target/product/hikey/obj/ETC/26.0.cil_intermediates/mapping/26.0.cil
Parsing out/target/product/hikey/obj/FAKE/selinux_policy_intermediates/plat_pub_policy.cil
[  0% 23/2323] build out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_policy_raw.cil
out/host/linux-x86/bin/checkpolicy:  loading policy configuration from out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_policy.conf
out/host/linux-x86/bin/checkpolicy:  policy configuration loaded
out/host/linux-x86/bin/checkpolicy:  writing CIL to out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_policy_raw.cil.tmp
[  4% 115/2323] build out/target/product/hikey/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil
out/host/linux-x86/bin/checkpolicy:  loading policy configuration from out/target/product/hikey/obj/ETC/plat_sepolicy.cil_intermediates/plat_policy.conf
out/host/linux-x86/bin/checkpolicy:  policy configuration loaded
out/host/linux-x86/bin/checkpolicy:  writing CIL to out/target/product/hikey/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil
[  5% 121/2323] build out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil
Parsing out/target/product/hikey/obj/FAKE/selinux_policy_intermediates/plat_pub_policy.cil
Parsing out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_policy_raw.cil
[ 17% 411/2323] build out/target/product/hikey/obj/ETC/precompiled_sepolicy_intermediates/precompiled_sepolicy
**FAILED**: out/target/product/hikey/obj/ETC/precompiled_sepolicy_intermediates/precompiled_sepolicy 
/bin/bash -c "out/host/linux-x86/bin/secilc -M true -G -c 30 		out/target/product/hikey/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil out/target/product/hikey/obj/ETC/26.0.cil_intermediates/26.0.cil out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil -o out/target/product/hikey/obj/ETC/precompiled_sepolicy_intermediates/precompiled_sepolicy -f /dev/null"
neverallow check failed at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:2479
  (neverallow base_typeattr_56_26_0 base_typeattr_57_26_0 (file (execute execute_no_trans entrypoint)))
    <root>
    allow at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:5784
      (allow hal_bluetooth_hikey hal_bluetooth_hikey_exec (file (read getattr execute entrypoint open)))
    <root>
    allow at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:5793
      (allow hci_attach hci_attach_exec (file (read getattr execute entrypoint open)))

neverallow check failed at out/target/product/hikey/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil:4425 from system/sepolicy/public/domain.te:672
  (neverallow base_typeattr_56 base_typeattr_57 (file (execute execute_no_trans entrypoint)))
    <root>
    allow at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:5784
      (allow hal_bluetooth_hikey hal_bluetooth_hikey_exec (file (read getattr execute entrypoint open)))
    <root>
    allow at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:5793
      (allow hci_attach hci_attach_exec (file (read getattr execute entrypoint open)))

Failed to generate binary
Failed to build policydb
[ 17% 415/2323] build out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy
FAILED: out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy 
/bin/bash -c "(out/host/linux-x86/bin/secilc -M true -G -c 30 out/target/product/hikey/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil out/target/product/hikey/obj/ETC/26.0.cil_intermediates/26.0.cil out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil -o out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy.tmp -f /dev/null ) && (out/host/linux-x86/bin/sepolicy-analyze out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy.tmp permissive > out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains ) && (if [ \"userdebug\" = \"user\" -a -s out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains ]; then 		echo \"==========\" 1>&2; 		echo \"ERROR: permissive domains not allowed in user builds\" 1>&2; 		echo \"List of invalid domains:\" 1>&2; 		cat out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains 1>&2; 		exit 1; 		fi ) && (mv out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy.tmp out/target/product/hikey/obj/ETC/sepolicy_intermediates/sepolicy )"
neverallow check failed at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:2479
  (neverallow base_typeattr_56_26_0 base_typeattr_57_26_0 (file (execute execute_no_trans entrypoint)))
    <root>
    allow at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:5784
      (allow hal_bluetooth_hikey hal_bluetooth_hikey_exec (file (read getattr execute entrypoint open)))
    <root>
    allow at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:5793
      (allow hci_attach hci_attach_exec (file (read getattr execute entrypoint open)))

neverallow check failed at out/target/product/hikey/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil:4425 from system/sepolicy/public/domain.te:672
  (neverallow base_typeattr_56 base_typeattr_57 (file (execute execute_no_trans entrypoint)))
    <root>
    allow at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:5784
      (allow hal_bluetooth_hikey hal_bluetooth_hikey_exec (file (read getattr execute entrypoint open)))
    <root>
    allow at out/target/product/hikey/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:5793
      (allow hci_attach hci_attach_exec (file (read getattr execute entrypoint open)))

Failed to generate binary
Failed to build policydb
[ 18% 438/2323] cc 'out/soong/.intermediates/hardware/interfaces/radio/1...armv8-a_shared_core/obj/android/hardware/radio/1.0/RadioIndicationAll.o'

[ 19% 442/2323] cc 'out/soong/.intermediates/hardware/interfaces/radio/1...4_armv8-a_shared_core/obj/android/hardware/radio/1.0/RadioResponseAll.o'
ninja: build stopped: subcommand failed.
18:26:20 ninja failed with: exit status 1
make: *** [run_soong_ui] Error 1

These errors seem to be related to bluetooth but thats not am working on
Need help in fixing these

Thanks

#20

Did you just add PRODUCT_FULL_TREBLE_OVERRIDE to your existing code without updating (i.e. repo sync) first? I mean the existing code base might not be new enough to support it? It might be good to start from scratch with a new build just to make sure no old build artifacts are affecting the build. Btw, there’s now hikey op-tee android 8 build instruction: https://github.com/linaro-swg/optee_android_manifest/tree/lcr-ref-hikey-o.