I didn’t put any android or linux on it. I flashed the files that are in the ./recovery-flash-uefi.sh with the latest release of UEFI. But i did’t know if there was al ready something on the board that is booted. Does recovery clean the emmc before flashing new files on to it?
I manualy used fastboot erase on the ptable, nvme, fw_lpm3, trustfirmware and boot. I did say it erased those things succesfully. But when i erase the samething like 4 times after each other it keeps saying successful so i’m not sure if it’s working. When i try to erase xloader or fastboot it gives an error.
I used the ./recovery-flash-uefi.sh again. Now it doesn’t boot to grub any more. But i still can’t give any input.
Press ESCAPE for boot options .Android Fastboot mode - version 0.7.
Press RETURN or SPACE key to quit.
Downloading 24576 bytes
24576 / 24576 bytes downloaded (100%)
Flashing partition ptable
Done.
Downloading 154752 bytes
154752 / 154752 bytes downloaded (100%)
Flashing partition xloader
Done.
Downloading 1179648 bytes
1179648 / 1179648 bytes downloaded (100%)
Flashing partition fastboot
Done.
Downloading 1519104 bytes
1519104 / 1519104 bytes downloaded (100%)
Flashing partition fip
Done.
This is my output from the uart. After reboot
hikey960 boarid:5301 xloader use UART6
scsysstat_value[0].
clear reset source
last_keypoint0,reboot_type0
secdbg not DCU.
SecDbgVer exit
xloader chipid is: 0x36600110, start at 371ms.
Build Date: Sep 19 2017, 15:34:09
[clock_init] ++
hikey960 [hikey960_clk_init]
hi3660 [clk_setup]
[clock_init] –
storage type is UFS
ufs retry: 6 count v_tx:0 v_rx:0
ufs set v_tx:0 v_rx:0
Hikey960[5301] no need avs_init.
ddr ft:0xf20332a3,mode:1 target:4
UceLdOk
ch 0 gt_errfail, STATUS:0x00000060
ch 0 gdst_errfail, STATUS:0x00000040
ch 1 gt_errfail, STATUS:0x00000060
ch 1 gdst_errfail, STATUS:0x00000040
ch 2 gt_errfail, STATUS:0x00000060
ch 2 gdst_errfail, STATUS:0x00000040
ch 3 gt_errfail, STATUS:0x00000060
ch 3 gdst_errfail, STATUS:0x00000040
timeout
timeout
timeout
timeout
density: 0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000
ddr info 0x00000306
400M
685M
1067M
C1R,V0x0000002d e:66
C2R,V0x0000002d e:66
C3R,V0x0000002d e:66
C0R,V0x0000002d e:66
C1R,V0x0000002e e:66
C2R,V0x0000002e e:66
C3R,V0x0000002e e:66
C0R,V0x0000002e e:66
C1R,V0x0000002f e:65
C2R,V0x0000002f e:66
C3R,V0x0000002f e:66
C0R,V0x0000002f e:65
C1R,V0x00000030 e:65
C2R,V0x00000030 e:65
C3R,V0x00000030 e:65
1244M
1866M
C2R,V0x00000015 e:113
C0R,V0x00000016 e:66
C2R,V0x00000016 e:66
C0R,V0x00000017 e:66
C1R,V0x00000017 e:193
C2R,V0x00000017 e:66
C3R,V0x00000017 e:66
iomcu_subsys_init
boot_c0 PROFILE 4
slave0 irq0:0x00000004
slave1 irq0:0x00000004
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v1.4(release):v1.4-656-g15e59585
NOTICE: BL1: Built : 11:03:12, Feb 12 2018
NOTICE: BL1: Booting BL2
NOTICE: BL2: v1.4(release):v1.4-656-g15e59585
NOTICE: BL2: Built : 11:03:12, Feb 12 2018
NOTICE: BL1: Booting BL31
NOTICE: BL31: v1.4(release):v1.4INFO: TEE-CORE:
INFO: TEE-CORE: op-tee version: 2.6.0 #1 Mon Feb 12 11:03:10 UTC 2018 aarch64
INFO: TEE-CORE: Initialized
UEFI firmware (version Alpha built at 11:02:50 on Feb 12 2018)
Press ESCAPE for boot options .Android Fastboot mode - version 0.7.
Press RETURN or SPACE key to quit.
Pressing any of these buttons doesn’t do anything. The board is in auto power mode.