This is a cache of https://discuss.96boards.org/t/410c-linaro-release-15-07-wifi-working/184. It is a snapshot of the page at 2024-11-01T02:49:16.890+0000.
410C Linaro release 15.07 wifi working? - DragonBoard410c - 96Boards Forum

410C Linaro release 15.07 wifi working?

Products Support DragonBoard410c
#1

Hi all,

Linaro linux 15.07 is available.

can anyone have tested wifi with Dragonboard 410C with new linux release???

#2

yes. are you trying to report any specific issue here?
thanks.

#3

Hi ndec,

I just want to know that wifi is working in new release of Linux 15.07.
because in my case it’s not working…

thanks.

#4

I also have an issue on wifi. My board is Android version. When I turn on the wifi, nothing happen (keep searching while there are lot of APs). When I hit back, then the setting is back to off somehow.

Thanks.

#5

as per the release notes, WIFI is working in 15.07. If it doesn’t work for you, please provide detailled info about the failure, your setup, … here or on the bugzilla.
thanks

#6

this topic is about wifi in Linux/ubuntu 15.07 release. You seem to be facing another issue, since you are using Android. Can you please create a new topic with detailed information about your error and setup?
thanks

#7

Hi ndec,

I am flashing Dragonboard 410C with compiled boot.img of Linux new release.
and i did not find any wlan node.

so I see in the kernel logs i found something like this that my wifi chip driver probe failed.
[ 1.886374] wcnss: IRIS Reg: 0x51120004
[ 1.915908] subsys-pil-tz a21b000.qcom,pronto: Direct firmware load for wcnss.mdt failed with error -2
[ 1.915988] subsys-pil-tz a21b000.qcom,pronto: wcnss: Failed to locate wcnss.mdt
[ 1.924247] wcn36xx-msm: probe of a000000.qcom,wcn36xx failed with error -2

is this the reason that my wifi is not working???

#8

hi,
yes, that would explain why wlan doesn’t work.

Have you tried with the boot .img file from the release or are you recompiling it yourself? How did you flash your board?

#9

Hi,
yes, wifi is working with the boot.img from the release.

but when i compile the source of linux 15.07 and flash the board with compiled boot.img,
then in that case wifi is not working and i am getting following error logs.

[ 1.886374] wcnss: IRIS Reg: 0x51120004
[ 1.915908] subsys-pil-tz a21b000.qcom,pronto: Direct firmware load for wcnss.mdt failed with error -2
[ 1.915988] subsys-pil-tz a21b000.qcom,pronto: wcnss: Failed to locate wcnss.mdt
[ 1.924247] wcn36xx-msm: probe of a000000.qcom,wcn36xx failed with error -2

#10

well, then you might be doing something wrong , it would really help if you give more details about what you are doing, how you config’d and built the kernel, and how you created the boot image.

#11

Hi ndec,

once again i am trying to compile WCNXX driver statically. but it is given as module in defconfig.

so when i compiled WCNXX driver as a module and load it.

Wifi is working in linux release 15.07

thanks ndec.