Hello. I’ve bought the adapter.
But I have a few problems.
I use this Debian bubblegum-jessie_alip_20160325-15.emmc.img.gz
I did steps 10 steps. But when I start an 11 step I get some errors
owl> setenv bootpart 2; boot
boot from emmc card …
reading uEnv.txt
** Unable to read file uEnv.txt **
reading boot.scr
458 bytes read in 1 ms (447.3 KiB/s)
Jumping to boot.scr
Executing script at 10800000
reading Image
11244072 bytes read in 278 ms (38.6 MiB/s)
reading uInitrd
6128989 bytes read in 152 ms (38.5 MiB/s)
reading s900_96board.dtb
29959 bytes read in 3 ms (9.5 MiB/s)
Image lacks image_size field, assuming 16MiB
Loading init Ramdisk from Legacy Image at 01ffffc0 …
Image Name: initramfs
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 6128925 Bytes = 5.8 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum … OK
Flattened Device Tree blob at 10000000
Booting using the fdt blob at 0x10000000
reserving fdt memory region: addr=19000000 size=3000000
reserving fdt memory region: addr=20000000 size=20000000
reserving fdt memory region: addr=18fff000 size=1000
reserving fdt memory region: addr=1f000000 size=1000000
Using Device Tree in place at 0000000010000000, end 000000001000a506
read_mi_head, line 467, magic 0x0, length 0, item num 0
read Head null
read bf-sn faild,errorcode:-1,
boot_append_bootargs_add, bootargs console=tty0 console=ttyS5,115200n8 root=/dev/disk/by-partlabel/SYSTEM rootwait rw actions.hdmi.mode=1920x1080@60
Starting kernel …
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.52-linaro-bubblegum (buildslave@x86-64-07) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Mar 25 07:38:33 UTC 2016
[ 0.000000] CPU: AArch64 Processor [410fd032] revision 2
[ 0.000000] Machine: s900
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: CMA: reserved 64 MiB at 7c000000
[ 0.000000] psci: probing function IDs from device-tree
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc07bfa2000 s19520 r8192 d21440 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
[ 0.000000] Kernel command line: console=tty0 console=ttyS5,115200n8 root=/dev/disk/by-partlabel/SYSTEM rootwait rw actions.hdmi.mode=1920x1080@60
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 1391792k/1391792k available, 705360k reserved
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
[ 0.000000] vmemmap : 0xffffffbc00000000 - 0xffffffbc01c00000 ( 28 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
[ 0.000000] .init : 0xffffffc000a38000 - 0xffffffc000a95c40 ( 376 kB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000a37a74 ( 9951 kB)
[ 0.000000] .data : 0xffffffc000a96000 - 0xffffffc000b39228 ( 653 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] [OWL] init sirqs, nr_sirq 3
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000000] [OWL] timer initialization
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000562] Calibrating delay loop (skipped), value calculated using timer frequency… 48.00 BogoMIPS (lpj=240000)
[ 0.000562] pid_max: default: 32768 minimum: 301
[ 0.000687] Security Framework initialized
[ 0.000687] SELinux: Disabled at boot.
[ 0.000749] Mount-cache hash table entries: 256
[ 0.004906] Initializing cgroup subsys debug
[ 0.004906] Initializing cgroup subsys freezer
[ 0.005124] /cpus/cpu@0: Missing clock-frequency property
[ 0.005156] /cpus/cpu@1: Missing clock-frequency property
[ 0.005156] /cpus/cpu@2: Missing clock-frequency property
[ 0.005187] /cpus/cpu@3: Missing clock-frequency property
[ 0.005187] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.005218] EFI services will not be available.
[ 0.060187] CPU1: Booted secondary processor
[ 0.080156] CPU2: Booted secondary processor
[ 0.100156] CPU3: Booted secondary processor
[ 0.100218] Brought up 4 CPUs
[ 0.100281] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.100812] devtmpfs: initialized
[ 0.103937] pinctrl core: initialized pinctrl subsystem
[ 0.104187] regulator-dummy: no parameters
[ 0.105499] NET: Registered protocol family 16
[ 0.106124] vdso: 2 pages (1 code, 1 data) at base ffffffc000a9d000
[ 0.106156] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.107343] software IO TLB [mem 0x79400000-0x79800000] (4MB) mapped at [ffffffc079400000-ffffffc0797fffff]
[ 0.107406] requeue_bios init work
[ 0.107437] scan_work init work
[ 0.108593] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.108687] [OWL] Power domain initialization
[ 0.108812] [OWL] S900 clock initialization
[ 0.109843] [OWL] pinctrl initialization
[ 0.109874] pinctrl-s900 e01b0000.pinctrl: nfunctions 49, ngroups 94
[ 0.111406] [OWL] register reset controller
[ 0.111874] GPIOA initialization
[ 0.112343] GPIOB initialization
[ 0.112812] GPIOC initialization
[ 0.113343] GPIOD initialization
[ 0.113812] GPIOE initialization
[ 0.114312] GPIOF initialization
[ 0.122874] bio: create slab <bio-0> at 0
[ 0.123343] [OWL] initialize DMA controller
[ 0.123374] dma-owl e0260000.dma-controller: dma-channels 12, dma-requests 46
[ 0.126124] eta355c_init 297
[ 0.126343] gpu-gpio-supply: 875 <–> 1000 mV at 1000 mV
[ 0.127124] SCSI subsystem initialized
[ 0.127156] [OWL] SPI controller initialization
[ 0.127374] usbcore: registered new interface driver usbfs
[ 0.127406] usbcore: registered new interface driver hub
[ 0.127468] usbcore: registered new device driver usb
[ 0.127562] [OWL] I2C controller initialization
[ 0.128156] i2c-owl e0170000.i2c: I2C adapter ready to operate.
[ 0.128437] i2c-owl e0172000.i2c: I2C adapter ready to operate.
[ 0.128593] i2c-owl e0174000.i2c: I2C adapter ready to operate.
[ 0.128906] atc260x_i2c 3-0065: Probing…
[ 0.128968] atc260x_i2c 3-0065: atc260x_core_dev_init() enter
[ 0.130281] atc260x_i2c 3-0065: detect PMU chip type 2 ver D
[ 0.130281] atc260x_i2c 3-0065: PMU root IRQ 130
[ 0.130874] atc260x-regulator atc2609a-dcdc0.0: Probing atc2609a-dcdc0, id=0
[ 0.132031] dcdc0: 600 <–> 1300 mV at 925 mV
[ 0.132343] atc260x-regulator atc2609a-dcdc1.1: Probing atc2609a-dcdc1, id=1
[ 0.133531] dcdc1: 600 <–> 1300 mV at 925 mV
[ 0.133843] atc260x-regulator atc2609a-dcdc2.2: Probing atc2609a-dcdc2, id=2
[ 0.134999] dcdc2: 600 <–> 1350 mV at 1300 mV
[ 0.135312] atc260x-regulator atc2609a-dcdc3.3: Probing atc2609a-dcdc3, id=3
[ 0.136468] dcdc3: 600 <–> 3500 mV at 3100 mV
[ 0.136781] atc260x-regulator atc2609a-dcdc4.4: Probing atc2609a-dcdc4, id=4
[ 0.137937] dcdc4: 600 <–> 1300 mV at 925 mV
[ 0.138249] atc260x-regulator atc2609a-ldo0.0: Probing atc2609a-ldo0, id=0
[ 0.140593] ldo0: 2300 <–> 3400 mV at 3100 mV
[ 0.140906] atc260x-regulator atc2609a-ldo1.1: Probing atc2609a-ldo1, id=1
[ 0.141124] ldo1: 2300 <–> 3400 mV at 3300 mV
[ 0.141437] atc260x-regulator atc2609a-ldo2.2: Probing atc2609a-ldo2, id=2
[ 0.143812] ldo2: 2300 <–> 3400 mV at 3100 mV
[ 0.144124] atc260x-regulator atc2609a-ldo3.3: Probing atc2609a-ldo3, id=3
[ 0.144156] atc260x-regulator atc2609a-ldo3.3: attemp to change volt band to #0
[ 0.146624] ldo3: 700 <–> 2200 mV at 1800 mV
[ 0.146937] atc260x-regulator atc2609a-ldo4.4: Probing atc2609a-ldo4, id=4
[ 0.146968] atc260x-regulator atc2609a-ldo4.4: attemp to change volt band to #0
[ 0.149468] ldo4: 700 <–> 2200 mV at 1800 mV
[ 0.149843] atc260x-regulator atc2609a-ldo6.6: Probing atc2609a-ldo6, id=6
[ 0.149874] atc260x-regulator atc2609a-ldo6.6: attemp to change volt band to #0
[ 0.152374] ldo6: 850 <–> 2200 mV at 1050 mV
[ 0.152687] atc260x-regulator atc2609a-ldo7.7: Probing atc2609a-ldo7, id=7
[ 0.152718] atc260x-regulator atc2609a-ldo7.7: attemp to change volt band to #0
[ 0.153093] ldo7: 700 <–> 2200 mV at 1800 mV
[ 0.153406] atc260x-regulator atc2609a-ldo8.8: Probing atc2609a-ldo8, id=8
[ 0.153437] atc260x-regulator atc2609a-ldo8.8: attemp to change volt band to #1
[ 0.153781] ldo8: 2100 <–> 3300 mV at 3200 mV
[ 0.154124] atc260x-regulator atc2609a-ldo9.9: Probing atc2609a-ldo9, id=9
[ 0.156312] ldo9: 2600 <–> 3300 mV at 3100 mV
[ 0.157499] atc260x-pm atc2609a-pm.0: Probing…
[ 0.157499] atc260x-pm atc2609a-pm.0: _atc260x_pm_set_wakeup_src_inner() enter, mask=0x7fff src=0x706
[ 0.157812] atc260x-pm atc2609a-pm.0: _atc260x_pm_set_wakeup_src_inner() setup reg=0x0 msk=0xffe0 val=0xe0c0 readback=0xe0d5
[ 0.157999] atc260x-pm atc2609a-pm.0: _atc260x_pm_set_wakeup_src_inner() enter, mask=0x8 src=0x0
[ 0.158281] atc260x-pm atc2609a-pm.0: _atc260x_pm_set_wakeup_src_inner() setup reg=0x0 msk=0x100 val=0x0 readback=0xe0d5
[ 0.158874] atc260x-pm atc2609a-pm.0: _clear_status() no need to restore old alarm
[ 0.159781] atc260x-pm atc2609a-pm.0: atc260x_pm_setup_wall_vbus_wakup_function() can not get of_property support_adaptor_type
[ 0.159781] atc260x-pm atc2609a-pm.0: atc260x_pm_probe() setup_wall_vbus_wakup_function failed
[ 0.160093] atc260x-pm atc2609a-pm.0: translated wakeup falgs: 0x200
[ 0.160156] [PM] set pmic suspend ops 0xffffffc000adeca8
[ 0.160312] atc260x-pm atc2609a-pm.0: #####atc260x_pm_probe PMU_SYS_CTL0:0xe0d5 ####
[ 0.160343] atc260x_i2c 3-0065: atc260x_core_dev_init() exit
[ 0.160343] i2c-owl e0176000.i2c: I2C adapter ready to operate.
[ 0.160718] i2c-owl e0178000.i2c: I2C adapter ready to operate.
[ 0.160843] media: Linux media interface: v0.10
[ 0.160874] Linux video capture interface: v2.00
[ 0.161406] [OWL] ion_heap_fb: base 0x0, size 0x0
[ 0.161406] [OWL] ion_heap_pmem: base 0x20000000, size 0x20000000
[ 0.161437] [OWL] ion_heap_reserved: base 0x0, size 0x0
[ 0.170656] Advanced Linux Sound Architecture Driver Initialized.
[ 0.171062] Bluetooth: Core ver 2.16
[ 0.171093] NET: Registered protocol family 31
[ 0.171093] Bluetooth: HCI device and connection manager initialized
[ 0.171124] Bluetooth: HCI socket layer initialized
[ 0.171156] Bluetooth: L2CAP socket layer initialized
[ 0.171156] Bluetooth: SCO socket layer initialized
[ 0.171406] cfg80211: Calling CRDA to update world regulatory domain
[ 0.172093] Switching to clocksource arch_sys_counter
[ 0.196812] NET: Registered protocol family 2
[ 0.197249] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.197531] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.197906] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.197968] TCP: reno registered
[ 0.197968] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.198062] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.198312] NET: Registered protocol family 1
[ 0.198468] Trying to unpack rootfs image as initramfs…
[ 0.470437] Freeing initrd memory: 5984K (ffffffc002000000 - ffffffc0025d8000)
[ 0.471281] audit: initializing netlink socket (disabled)
[ 0.471312] type=2000 audit(0.460:1): initialized
[ 0.476406] VFS: Disk quotas dquot_6.5.2
[ 0.476593] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.477937] exFAT: Version 1.2.9
[ 0.478374] fuse init (API version 7.22)
[ 0.478687] msgmni has been set to 3882
[ 0.479843] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.479843] io scheduler noop registered
[ 0.479874] io scheduler deadline registered
[ 0.479968] io scheduler cfq registered (default)
[ 0.480093] pwm-owl e01b0000.pwm: owl_pwm_probe
[ 0.480124] pwm-owl e01b0000.pwm: pc->baseffffff800006c000
[ 0.480374] owl_dss_core: owl_dss_init, start
[ 0.480374] owl_ctrl: owl_ctrl_init, start
[ 0.480406] owl_panel: owl_panel_init, start
[ 0.480406] owl_de_s900_init
[ 0.480593] de-s900 e02e0000.de: de_s900_probe, pdev = 0xffffffc079e28c00
[ 0.480624] owl_de: owl_de_register, start
[ 0.482687] de-s900 e02e0000.de: de_s900_device_power_on
[ 0.486031] owl_de_mmu: owl_de_mmu_init, base 0xffffff800007a000 base_phys 0x7c100000 mmu.addr 0xffffff800007a000
[ 0.486062] owl_de: owl_de_debugfs_create, start
[ 0.486718] ip_sx00_platform_init
[ 0.486812] hdmi-ip-sx00 e0250000.hdmi: ip_sx00_probe
[ 0.486874] hdmi_ip_register
[ 0.487031] owl_ctrl: owl_ctrl_register, start
[ 0.487062] hdmi_ddc: hdmi_iic_probe, OK
[ 0.487249] panel_ghp_init
[ 0.487312] panel-ghp hdmi_panel.3: panel_ghp_probe
[ 0.487343] owl_panel: owl_panel_parse_panel_info, start
[ 0.487374] owl_panel: owl_panel_parse_panel_info, no entry for ‘videomode-0’
[ 0.487374] owl_panel: owl_panel_register, start
[ 0.487468] owl_ctrl: owl_ctrl_add_panel, start
[ 0.487562] owl_fb_init
[ 0.487656] owl-fb framebuffer.7: owl_fb_probe
[ 0.494749] owl_panel: owl_panel_enable, state 2, power_on_delay 0, enable_delay 0
[ 0.494781] owl_ctrl: owl_ctrl_enable, start
[ 0.494812] hdmi-ip-sx00 e0250000.hdmi: owl_hdmic_enable
[ 0.495093] vce_drv: warning: cann’t get vol regulator, may be this board not need, or lost in dts!
[ 0.495187] #### insmod vde driver!
[ 0.495374] mali0 e0280000.vde: Probe vde device
[ 0.495374] info ic_type 0x900
[ 0.495406] mali0 e0280000.vde: resource: iomem: [mem 0xe0280000-0xe0280107] mapping to ffffff8001464000, irq 82
[ 0.495468] SPS_PG_CTL = 0xffffff8001466000
[ 0.495468] CMU_COREPLL = 0xffffff8001468000
[ 0.495468] CMU_VDE_CLK = 0xffffff800146a040
[ 0.495499] CMU_DEVRST0 = 0xffffff800146c0a8
[ 0.495499] CMU_DEVCLKEN0 = 0xffffff800146e0a0
[ 0.495531] dev add ffffffc079e2a810, vde_clk ffffffc079e09b80
[ 0.495593] #### insmod hde driver!
[ 0.495749] hde e0230000.hde: Probe hde device
[ 0.495749] info ic_type 0x900
[ 0.495781] hde e0230000.hde: resource: iomem: [mem 0xe0230000-0xe0230107] mapping to ffffff8001470000, irq 98
[ 0.495843] SPS_PG_CTL = 0xffffff8001472000
[ 0.495843] CMU_HDE_CLK = 0xffffff8001474000
[ 0.495843] CMU_HDE_CLK = 0xffffff800147603c
[ 0.495874] CMU_DEVRST0 = 0xffffff80014780a8
[ 0.495874] CMU_DEVCLKEN0 = 0xffffff800147a0a0
[ 0.495874] dev add ffffffc079e2ac10, hde_clk ffffffc079d5e480
[ 0.495968] owl_dmm_pm_init
[ 0.496062] owl_chipid_init
[ 0.496437] serial-owl e0126000.uart: detected port 3
[ 0.496499] e0126000.uart: ttyS3 at MMIO 0xe0126000 (irq = 64) is a serial-owl
[ 0.496687] serial-owl e012a000.uart: detected port 5
[ 0.496718] e012a000.uart: ttyS5 at MMIO 0xe012a000 (irq = 66) is a serial-owl
[ 0.533468] open file /dev/nand0
[ 0.533499] file is err
[ 0.533499] open file /dev/block/nand0
[ 0.533499] file is err
[ 0.533499] open file /dev/md_d0
[ 0.533499] file is err
[ 0.533499] open file /dev/block/md_d0
[ 0.533499] file is err
[ 0.533531] open file /dev/mmcblk0
[ 0.533531] file is err
[ 0.533531] open file /dev/block/mmcblk0
[ 0.533531] file is err
[ 0.533531] no blk dev
[ 0.533531] read MiscInfoHeader failed
[ 0.533531] read Head failed
[ 0.533531] ip_sx00_hdcp: hdcp_read_key, failed to read hdcp key from secure storage(-11)
[ 0.538687] hdmi-ip-sx00 e0250000.hdmi: hdmic_update_mode_list, n_modes 6
[ 1.801906] console [ttyS5] enabled
[ 1.805624] [OWL] serial driver initialized
[ 1.814374] brd: module loaded
[ 1.819781] loop: module loaded
[ 1.822968] misc_info_init, line 1096, Mar 25 2016 07:37:34
[ 1.828624] mi_debug_init, line 353
[ 1.832562] tun: Universal TUN/TAP device driver, 1.6
[ 1.837624] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.844031] PPP generic driver version 2.4.2
[ 1.848406] PPP BSD Compression module registered
[ 1.853124] PPP Deflate Compression module registered
[ 1.858187] PPP MPPE Compression module registered
[ 1.862999] NET: Registered protocol family 24
[ 1.867531] usbcore: registered new interface driver rtl8150
[ 1.873218] usbcore: registered new interface driver r8152
[ 1.878749] usbcore: registered new interface driver asix
[ 1.884187] usbcore: registered new interface driver ax88179_178a
[ 1.890312] usbcore: registered new interface driver cdc_ether
[ 1.896187] usbcore: registered new interface driver net1080
[ 1.901874] usbcore: registered new interface driver cdc_subset
[ 1.907812] usbcore: registered new interface driver zaurus
[ 1.913468] usbcore: registered new interface driver cdc_ncm
[ 1.919156] usbcore: registered new interface driver sr9700_android
[ 1.925468] usbcore: registered new interface driver CoreChips
[ 1.931406] owl_usb2phy_probe 171:Mar 25 2016 07:38:07
[ 1.936687] owl_usb3phy_probe 99:Mar 25 2016 07:38:07
[ 1.942781] s900_usb3phy_init 0x5d:0x52
[ 1.946656] s900_usb3phy_init 0x87:0x20
[ 2.150499] s900_usb2phy_param_setup device mode
[ 2.162093] usb_charge_detect_init 132 adfu_running=0
[ 2.186531] dwc3_owl_probe 530 success
[ 2.190531] vbus_otg_en_gpio:115 1
[ 2.193937] port_host_plug_detect[0]:1
[ 2.197718] aotg_wake_lock[0]:0
[ 2.200874] pdev->id:0
[ 2.203499] start mon 0 …
[ 2.206624] vbus_otg_en_gpio:-1 0
[ 2.209937] port_host_plug_detect[1]:2
[ 2.213687] aotg_wake_lock[1]:1
[ 2.216843] pdev->id:1
[ 2.219406] start mon 1 …
[ 2.222812] mousedev: PS/2 mouse device common for all mice
[ 2.228624] atc260x-adckeypad atc2609a-adckeypad.0: Probing…
[ 2.234468] atc260x-adckeypad atc2609a-adckeypad.0: select AUXADC channel AUX0
[ 2.241718] atc260x-adckeypad atc2609a-adckeypad.0: keymapsize = 2
[ 2.247906] atc260x-adckeypad atc2609a-adckeypad.0: filter_dep = 3
[ 2.254124] atc260x-adckeypad atc2609a-adckeypad.0: variance = 15
[ 2.260218] atc260x-adckeypad atc2609a-adckeypad.0: poll_interval = 20ms
[ 2.267062] input: atc2609a-adckeypad as /devices/e0176000.i2c/i2c-3/3-0065/atc2609a-adckeypad.0/input/input0
[ 2.277468] atc260x-onoff atc2609a-onoff.0: Probing atc2609a-onoff
[ 2.283656] atc260x-onoff atc2609a-onoff.0: atc260x_onoff IRQ num : 284
[ 2.290374] input: atc260x_onoff as /devices/e0176000.i2c/i2c-3/3-0065/atc2609a-onoff.0/input/input1
[ 2.300468] usbcore: registered new interface driver xpad
[ 2.306312] atc260x-rtc atc2609a-rtc.0: Probing…
[ 2.312281] atc260x-adckeypad atc2609a-adckeypad.0: key_code=103 val=0
[ 2.320999] atc260x-rtc atc2609a-rtc.0: rtc core: registered atc260x-RTC as rtc0
[ 2.328718] atc260x-rtc atc2609a-rtc.0: RTC alarm IRQ num : 285
[ 2.335187] IR NEC protocol handler initialized
[ 2.339749] IR RC5(x) protocol handler initialized
[ 2.344562] IR RC6 protocol handler initialized
[ 2.349124] IR JVC protocol handler initialized
[ 2.353687] IR Sony protocol handler initialized
[ 2.358312] IR RC5 (streamzap) protocol handler initialized
[ 2.363906] IR SANYO protocol handler initialized
[ 2.368624] IR MCE Keyboard/mouse protocol handler initialized
[ 2.374531] atc260x_charger: version(r2p1), time stamp(20151111164507)
[ 2.381499] create sysfs for atc260x charger
[ 2.385812] [atc260x_charger_cfg_init] backlight_on_vol_diff not found, 350 default
[ 2.393531] [atc260x_charger_cfg_init] backlight_off_vol_diff not found, 400 default
[ 2.401312] [atc260x_charger_cfg_init] change_current_temp not found, 1 default
[ 2.408624] [atc260x_charger_cfg_init] cur_rise_enable not found, 0 default
[ 2.415624] [atc260x_charger_cfg_init] ot_shutoff_enable not found, 1 default
[ 2.422781] [atc260x_charger_cfg_init] ext_buck_exist not found, 0 default
[ 2.429656] atc260x_charger_cfg_init wall swicth gpio not exist!
[ 2.439999] [atc260x_charger_wallv_buck_init] unable to request PWM for ext dcdc
[ 2.448156] atc260x-hwmon atc2609a-hwmon.0: Probing atc2609a-hwmon
[ 2.454593] PDEVID = 0
[ 2.456999] tmu-mem:start=0x3759341568
[ 2.460781] tmu-mem:data->base=0xffffff80014b8000
[ 2.465531] Begin to register thermal zone ,id = 0
[ 2.470531] owl_get_crit_temp
[ 2.532156] open file /dev/nand0
[ 2.535406] file is err
[ 2.537874] open file /dev/block/nand0
[ 2.541624] file is err
[ 2.544124] open file /dev/md_d0
[ 2.547374] file is err
[ 2.549843] open file /dev/block/md_d0
[ 2.553593] file is err
[ 2.556062] open file /dev/mmcblk0
[ 2.559468] file is err
[ 2.561937] open file /dev/block/mmcblk0
[ 2.565874] file is err
[ 2.568343] no blk dev
[ 2.570718] read MiscInfoHeader failed
[ 2.574468] read Head failed
[ 2.577374] ip_sx00_hdcp: hdcp_read_key, failed to read hdcp key from secure storage(-11)
[ 2.682156] OWL: Kernel Thermal management registered
[ 2.687249] PDEVID = 4
[ 2.689624] tmu-mem:start=0x3759341584
[ 2.693406] tmu-mem:data->base=0xffffff80014ba010
[ 2.698124] Begin to register thermal zone ,id = 4
[ 2.703062] owl_get_crit_temp
[ 2.802124] OWL: Kernel Thermal management registered
[ 2.807218] md: raid0 personality registered for level 0
[ 2.812812] device-mapper: uevent: version 1.0.3
[ 2.817624] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 2.826187] Bluetooth: HCI UART driver ver 2.2
[ 2.830624] Bluetooth: HCI H4 protocol initialized
[ 2.835468] cpuidle: using governor ladder
[ 2.839593] cpuidle: using governor menu
[ 2.844187] s900-mmc e0338000.mmc: using dma0chan0 for DMA transfers
[ 2.882312] s900-mmc e0334000.mmc: using dma0chan1 for DMA transfers
[ 2.888718] wifi card use 1.8v to scan
[ 2.896156] get wifi ldo voltage:3300000-3310000
[ 2.900781] Regulator wifi bt power init
[ 2.942656] SDC0 use sdio uart conversion
[ 2.946718] s900-mmc e0330000.mmc: using dma0chan2 for DMA transfers
[ 2.953156] use GPIO to detect SD/MMC card
[ 2.974218] mmc0: BKOPS_EN bit is not set
[ 2.986249] mmc reinit ok
[ 2.988906] emmc init ok
[ 2.991437] mmc0: new high speed DDR MMC card at address 0001
[ 2.997437] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.003374] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
[ 3.004218] usbcore: registered new interface driver usbhid
[ 3.004249] usbhid: USB HID core driver
[ 3.017906] ashmem: initialized
[ 3.021218] logger: created 256K log ‘log_main’
[ 3.025968] logger: created 256K log ‘log_events’
[ 3.030843] logger: created 256K log ‘log_radio’
[ 3.035624] logger: created 256K log ‘log_system’
[ 3.041062] s900_pcm_init
[ 3.043906] s900-pcm-audio s900-pcm-audio: s900_pcm_probe!!
[ 3.049531] atc2609a_audio_init audio!!!
[ 3.053718] mmcblk0: p1 p2 p3 p4 p5
[ 3.053781] atc2609a_audio_platform_probe!
[ 3.053781] add file!
[ 3.053781] add file!
[ 3.053999] it’s ok 0
[ 3.054031] owl-audio-i2s e0100000.owl-audio-i2s: s900_dai_probe
[ 3.054218] s900-hdmi-audio s900-hdmi-audio: s900_hdmi_probe!!
[ 3.054249] s900_link_init
[ 3.054531] soc-audio soc-audio: ASoC: machine s900_link should use snd_soc_register_card()
[ 3.193812] atc2609a-audio atc260x-audio: ASoC: no dapm match for AOUT FL FR Mixer → AOUT MIXER → ADC0 Mux
[ 3.203874] atc2609a-audio atc260x-audio: ASoC: Failed to add route AOUT FL FR Mixer → AOUT MIXER → ADC0 Mux
[ 3.216749] soc-audio soc-audio: atc2609a-dai <-> owl-audio-i2s mapping ok
[ 3.224062] soc-audio soc-audio: s900-hdmi-dai <-> owl-audio-i2s mapping ok
[ 3.231968] u32 classifier
[ 3.234718] Actions configured
[ 3.238124] Netfilter messages via NETLINK v0.30.
[ 3.242906] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.249343] ctnetlink v0.93: registering with nfnetlink.
[ 3.254812] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 3.261781] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 3.267781] xt_time: kernel timezone is -0000
[ 3.272406] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.277874] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 3.284281] arp_tables: (C) 2002 David S. Miller
[ 3.288937] TCP: cubic registered
[ 3.292312] Initializing XFRM netlink socket
[ 3.297062] NET: Registered protocol family 10
[ 3.302093] mip6: Mobile IPv6
[ 3.305093] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.310656] sit: IPv6 over IPv4 tunneling driver
[ 3.315999] NET: Registered protocol family 17
[ 3.320468] NET: Registered protocol family 15
[ 3.324968] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.330874] Bluetooth: HIDP socket layer initialized
[ 3.335874] lib80211: common routines for IEEE802.11 drivers
[ 3.341718] Registering SWP/SWPB emulation handler
[ 3.346874] [OWL] pm init
[ 3.349499] owl_pm_clear_flag: clear flag 0xffffffff
[ 3.354531] ppm_owl_drv_init
[ 3.357531] ppm_owl_base_init
[ 3.360499] ppm_owl_fsm_init
[ 3.363468] ppm_owl_sysfs_init
[ 3.366562] ppm_owl_stats_init
[ 3.370093] gpu-gpio-supply: disabling
[ 3.373874] regulator-dummy: disabling
[ 3.378187] ====otgvbus_gpio: num-114, active-high—detect_type=3,idpin_type=0,vbus_type=2—
[ 3.398999] atc260x-rtc atc2609a-rtc.0: setting system clock to 2015-01-01 02:06:16 UTC (1420077976)
[ 3.408218] atc2609a_battery: atc2609a_bat_init fail to find atc2609a-battery node
[ 3.415843] bq27441_battery_init fail to find bq27441-battery node
[ 3.422156] table ffffffc000afc318, i 0, cpu_dev ffffffc000bcf558, clk 1752000000, volt 1200000
[ 3.431062] table ffffffc000afc318, i 1, cpu_dev ffffffc000bcf558, clk 1608000000, volt 1125000
[ 3.439968] table ffffffc000afc318, i 2, cpu_dev ffffffc000bcf558, clk 1440000000, volt 1075000
[ 3.448874] table ffffffc000afc318, i 3, cpu_dev ffffffc000bcf558, clk 1104000000, volt 925000
[ 3.457656] table ffffffc000afc318, i 4, cpu_dev ffffffc000bcf558, clk 600000000, volt 850000
[ 3.466406] table ffffffc000afc318, i 5, cpu_dev ffffffc000bcf558, clk 240000000, volt 850000
[ 3.475374] cpu0_cpufreq_driver_init: locking_frequency: 1104000
[ 3.481499] [ppm_stat_notifier_policy,240]
[ 3.488656] ALSA device list:
[ 3.491624] #0: s900_link
[ 3.494843] Freeing unused kernel memory: 372K (ffffffc000a38000 - ffffffc000a95000)
Loading, please wait…
starting version 228
Begin: Loading essential drivers … done.
Begin: Running /scripts/init-premount … done.
Begin: Mounting root file system … Begin: Running /scripts/local-top … done.
Begin: Running /scripts/local-premount … [ 3.892562]
[ 3.892562] ========usb_detect_plugout_event===start det!!========
[ 3.900249] dwc3_plug_out 113
[ 3.903281] dwc3_plug_out 134 B_OUT
[ 3.932406] raid6: int64x1 466 MB/s
[ 4.102187] raid6: int64x2 808 MB/s
[ 4.272156] raid6: int64x4 1287 MB/s
[ 4.442156] raid6: int64x8 1361 MB/s
[ 4.445937] raid6: using algorithm int64x8 (1361 MB/s)
[ 4.451093] raid6: using intx1 recovery algorithm
[ 4.456749] xor: measuring software checksum speed
[ 4.532156] /home/buildslave/workspace/96boards-bubblegum/drivers/usb/monitor/umonitor_api.c–1212, wake_lock !!!
[ 4.542468] dwc3_plug_in 179
[ 4.545374] owl-dwc3 e040cd00.owl_dwc3: Unbalanced pm_runtime_enable!
[ 4.551906] s900_usb3phy_init 0x5d:0x52
[ 4.552124] 8regs : 3182.000 MB/sec
[ 4.559937] s900_usb3phy_init 0x87:0x20
[ 4.582124] open file /dev/nand0
[ 4.585374] file is err
[ 4.587843] open file /dev/block/nand0
[ 4.591593] file is err
[ 4.612124] open file /dev/md_d0
[ 4.615374] file is err
[ 4.617843] open file /dev/block/md_d0
[ 4.621593] file is err
[ 4.626406] read_mi_head, line 463, magic 0x0, length 0, item num 0
[ 4.632687] read Head null
[ 4.635406] ip_sx00_hdcp: hdcp_read_key, failed to read hdcp key from secure storage(-1)
[ 4.652124] 8regs_prefetch: 2907.200 MB/sec
[ 4.752124] 32regs : 3525.600 MB/sec
[ 4.775062] dwc3_plug_in 201 A_IN
[ 4.778593] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.784124] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.852124] 32regs_prefetch: 3293.200 MB/sec
[ 4.856781] xor: using function: 32regs (3525.600 MB/sec)
[ 4.862937] s900_usb2phy_param_setup host mode
[ 4.867468] xhci-hcd xhci-hcd.0.auto: irq 55, io mem 0xe0400000
[ 4.874656] hub 1-0:1.0: USB hub found
[ 4.876999] bio: create slab <bio-1> at 1
[ 4.878624] Btrfs loaded
Scanning for Btrfs filesystems
[ 4.885531] hub 1-0:1.0: 1 port detected
[ 4.891999] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.897843] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.905999] hub 2-0:1.0: USB hub found
[ 4.909781] hub 2-0:1.0: 1 port detected
[ 4.913968] ----monitor_wake_lock for 10s
done.
Begin: Checking root file system … fsck from util-linux 2.27.1
rootfs: Superblock needs_recovery flag is clear, but journal has data.
rootfs: Run journal anyway
rootfs: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code 4
done.
Failure: File system check of the root filesystem failed
The root filesystem on /dev/mmcblk0p3 requires a manual fsck
modprobe: module i8042 not found in modules.dep
modprobe: module ehci-pci not fo[ 5.080656] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
und in modules.dep
modprobe: module ehci-orion not found in modules.dep
modprobe: module uhci-hcd not fo[ 5.096749] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
und in modules.dep
BusyBox v1.22.1 (Debian 1:1.22.0-9+deb8u1) built-in shell (ash)
Enter ‘help’ for a list of built-in commands.
/bin/sh: can’t access tty; job control turned off
(initramfs) [ 12.752499] aotg_hcd e02c0000.usb: usb reset OK: 0.
[ 12.758562] aotg_hcd e02c0000.usb: AOTG USB Host Controller Driver
[ 12.765031] aotg_hcd e02c0000.usb: new USB bus registered, assigned bus number 3
[ 12.772687] aotg_hcd e02c0000.usb: irq 79, io mem 0xe02c0000
[ 12.778406] aotg_hcd e02c0000.usb: <HCD> start
[ 12.784906] hub 3-0:1.0: USB hub found
[ 12.788781] hub 3-0:1.0: 1 port detected
[ 12.832124] USBEIEN(0xffffff80014ac50b): 0x80
[ 12.836531] aotg_hcd e02c0000.usb: hcd controller initialized. OTGIRQ: 0x01, OTGSTATE: 0x02
[ 12.892187] ====>aotg_hub_suspend
[ 12.946531] port_no:1 OTG IRQ, OTGSTATE: 0x03, USBIRQ:0x00
[ 12.953124] aotg_hcd e02c0000.usb: <USB> e02c0000.usb connection changed: 1, acthcd->inserted: 1
[ 12.961999] aotg_hub_hotplug_timer:1607, dbg!
[ 12.966499] ======>aotg_hub_resume
[ 13.192281] usb 3-1: new high-speed USB device number 2 using aotg_hcd
[ 13.198906] aotg_hcd e02c0000.usb: device addr : 0x00000000
[ 13.322562] aotg_hcd e02c0000.usb: <EP DISABLE> ep0 index 0 from ep [in]
[ 13.342218] aotg_hcd e02c0000.usb: device addr : 0x00000002
[ 13.351562] hub 3-1:1.0: USB hub found
[ 13.355937] hub 3-1:1.0: 4 ports detected
[ 13.482281] ====>aotg_hub_suspend
[ 13.485687] port_no:1 OTG IRQ, OTGSTATE: 0x04, USBIRQ:0x00
This error
/bin/sh: can’t access tty; job control turned off
When I do a 13 step sudo dd if=bootloader.bin of=/dev/mmcblk0 seek=4097 bs=512 I get
(initramfs) dd if=bootloader.bin of=/dev/mmcblk0 seek=4097 bs=512
dd: can’t open ‘bootloader.bin’: No such file or directory
What am I doing wrong?