I follow the struction to install OpenEmbedded(OE) Linux on Hikey960
the output as followed：
I/TC: Dynamic shared memory is enabled
[ 0.284945] dmi: Firmware registration failed.
[ 0.366135] [USB3][hisi_dwc3_probe]+
[ 0.366545] [USB3][get_phy_param]eye diagram param: 0x1c466e3
[ 0.366555] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
[ 0.366564] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
[ 0.366570] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
[ 0.366577] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
[ 0.366606] [USB3][get_resource]this is asic platform (fpga flag 0)
[ 0.366614] [USB3][create_attr_file]+
[ 0.366675] [USB3][create_attr_file]-
[ 0.366684] [USB3][hi3660_usb3phy_init]+
[ 0.398035] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
[ 0.398611] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
[ 0.399495] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
[ 0.399503] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
[ 0.399510] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
[ 0.399517] [USB3][hi3660_usb3phy_init]-
[ 0.400735] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
[ 0.402622] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
[ 0.402638] [USB3][hisi_dwc3_probe]init state: OFF
[ 0.402645] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
[ 0.402651] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
[ 0.402658] [USB3][hisi_usb_otg_event]event: 1
[ 0.402672] [USB3][hisi_dwc3_probe]-
[ 0.402675] [USB3][event_work]+
[ 0.402677] [USB3][handle_event][handle_event] type: 1
[ 0.402722] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
[ 0.402732] [USB3][handle_event]hisi usb status: DEVICE -> OFF
[ 0.402739] [USB3][event_work]-
[ 0.407937] hi3660_thermal fff30000.tsensor: failed to register thermal sensor0: -19
[ 0.407969] hi3660_thermal fff30000.tsensor: failed to register thermal sensor1: -19
[ 0.407985] hi3660_thermal fff30000.tsensor: failed to register thermal sensor2: -19
[ 0.408002] hi3660_thermal fff30000.tsensor: failed to register thermal sensor3: -19
[ 0.408043] hi3660_thermal fff30000.tsensor: failed to register thermal sensor5: -19
[ 0.468594] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 0.684165] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[ 0.692632] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
[ 0.692634] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
[ 0.692640] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
[ 0.692641] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
[ 0.692642] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
[ 0.692644] [USB3][hisi_usb_otg_event]event: 2
[ 0.692652] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 0.692654] [USB3][event_work]+
[ 0.692655] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 0.692656] [USB3][handle_event][handle_event] type: 2
[ 0.692660] [USB3][set_vbus_power]set port power 1
[ 0.695595] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
[ 0.695598] [USB3][handle_event]hisi usb_status: OFF -> HOST
[ 0.695601] [USB3][event_work]-
[ 0.814060] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 0.821492] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 0.828913] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:3
[ 0.834664] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:3
[ 0.834665] [USB3][hisi_usb_otg_event]event: 3
[ 0.834675] [E/GPIO_HUB] gpio_hub_switch_to_typec: switch to typec
[ 0.834677] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:0
[ 0.834677] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:0
[ 0.834678] [USB3][hisi_usb_otg_event]event: 0
[ 0.834680] [USB3][hisi_usb_otg_event]schedule event_work wait:0]
[ 0.834681] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 0.834682] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 0.834879] [USB3][event_work]+
[ 0.834883] [USB3][handle_event][handle_event] type: 3
[ 0.834885] [USB3][set_vbus_power]set port power 0
[ 0.834894] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
[ 0.835889] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 0.835893] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
[ 0.835895] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=7,+++
[ 0.921928] hub 2-0:1.0: activate --> -108
[ 0.921958] hub 2-0:1.0: hub_ext_port_status failed (err = -108)
[ 0.942608] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
[ 0.948283] [USB3][handle_event]hiusb_status: HOST -> OFF
[ 0.953690] [USB3][handle_event][handle_event] type: 0
[ 1.210997] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
[ 1.217106] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
[ 1.223073] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 1.270210] [USB3][detect_charger_type]DCD done
[ 1.302219] [USB3][detect_charger_type]Primary Detection done
[ 1.334203] [USB3][detect_charger_type]Secondary Detection done
[ 1.366253] [USB3][detect_charger_type]type: 1
[ 1.370719] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
[ 1.379060] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
[ 1.384379] [USB3][handle_event]hisi usb status: OFF -> DEVICE
[ 1.390223] [USB3][event_work]-
[ 2.302287] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 3.838742] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 5.375002] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
[ 5.384659] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag_retry: query attribute, opcode 5, idn 3, failed with error -11 after 3 retires
[ 5.931877] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
[ 5.937996] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
[ 5.943960] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 6.911027] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, index 0, err = -11
[ 8.447020] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, index 0, err = -11
[ 9.983015] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, index 0, err = -11
[ 9.993619] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 8, desc_index 0, param_offset 0, ret -11
[ 10.006167] ufshcd-hi3660 ff3b0000.ufs: ufshcd_init_icc_levels: Failed reading power descriptor.len = 98 ret = -11
[ 10.652759] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
[ 10.658877] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
[ 10.664839] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 15.370717] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
[ 15.376571] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
[ 15.384333] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=8,+++
[ 31.006743] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 31.020166] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - issue time 10014820 us
[ 31.026875] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - Transfer Request Descriptor phys@0xdf058000
[ 31.035416] UPIU TRD: 00000000: 15000000 00000000 0000000f 00000000
[ 31.041689] UPIU TRD: 00000010: df040000 00000000 00800080 01000001
[ 31.047960] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - Request UPIU phys@0xdf040000
[ 31.055192] UPIU REQ: 00000000: 00d04001 00000000 00000000 24000000
[ 31.061465] UPIU REQ: 00000010: 00000012 00000024 00000000 00000000
[ 31.067736] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - Response UPIU phys@0xdf040200
[ 31.075053] UPIU RSP: 00000000: 00000000 00000000 00000000 00000000
[ 31.081326] UPIU RSP: 00000010: 00000000 00000000 00000000 00000000
[ 31.087598] UPIU RSP: 00000020: 00000000 00000000 00000000 00000000
[ 31.093867] UPIU RSP: 00000030: 00000000
[ 31.097792] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - PRDT - 1 entries phys@0xdf040400
[ 31.105457] UPIU PRDT: 00000000: 1943e000 00000002 00000000 00000023
[ 31.226801] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
what is the problem?How can I solve it?
